LIVE

New Open-Source RISC-V Processor Core Successfully Boots Linux

🔌 Chips & Hardware 1 min read 👁 5

Developers have introduced Fursoy Slice-1, a 64-bit out-of-order superscalar RISC-V processor built in SystemVerilog that successfully boots mainline Linux.

New Open-Source RISC-V Processor Core Successfully Boots Linux🔌Chips & Hardware

Photo: Hacker News Front Page

Key points

  • Fursoy Slice-1 is a 64-bit out-of-order superscalar RISC-V processor.
  • Successfully boots mainline Linux 6.6.50 and BusyBox userspace under Sv39 virtual memory.
  • Achieved Milestone 9 closeout with zero kernel panics across nearly 90 million simulated cycles.

A new 64-bit out-of-order superscalar RISC-V processor known as Fursoy Slice-1 has achieved a major development milestone by booting mainline Linux 6.6.50 alongside a BusyBox userspace. Written entirely in SystemVerilog, the architecture supports Sv39 virtual memory, standard privilege separations, and cycle-exact hardware performance telemetry.

According to the project documentation, the core targets a 500 MHz frequency using Nangate 45nm standard-cell synthesis closure across eight distinct functional blocks. Standalone evaluations utilizing open-source tools such as Yosys and OpenSTA recorded a total standard-cell area of approximately 175,106 square micrometers, though full system-on-chip place-and-route processes remain pending.

Milestone testing in Verilator simulated nearly 90 million cycles without registering kernel panics, access faults, or instruction-per-cycle conservation errors. The run successfully executed over 76 million retired instructions, achieving an average instructions-per-cycle metric of roughly 0.85.

What to watch next: Further progression toward full-SoC place-and-route and physical SRAM macro compilation.

Source Hacker News Front Page — github.com/FURSOY/fursoy-cpu ↗

Contact the newsroom

Got a tip, a proposal or a partnership question? Write to us and we will reply shortly.